/ip address add address=10.2.2.3/24 interface=ether3
/ip address add address=10.3.3.3/24 interface=ether2
 
# loopback interface
/interface bridge add name=lobridge
/ip address add address=10.9.9.3/32 interface=lobridge
 
# add routes to loopback addresses
/ip route add dst-address=10.9.9.2/32 gateway=10.2.2.2
/ip route add dst-address=10.9.9.4/32 gateway=10.3.3.4

/mpls ldp set enabled=yes transport-address=10.9.9.3
/mpls ldp interface add interface=ether2
/mpls ldp interface add interface=ether3
/mpls set propagate-ttl=no

/routing bgp peer add remote-address=10.9.9.2 remote-as=65530 route-reflect=yes \
  address-families=vpnv4 update-source=lobridge
/routing bgp peer add remote-address=10.9.9.4 remote-as=65530 route-reflect=yes \
  address-families=vpnv4 update-source=lobridge
# client-to-client-reflection is on by default
/routing bgp instance set default client-to-client-reflection=yes