/interface bridge
add name=loop1 protocol-mode=none
set [ find default=yes ] supplicant-identity=PE-D


/ip address add address=10.3.3.4/24 interface=ether2
/ip address add address=10.4.4.4/24 interface=ether3

/ip route vrf add routing-mark=vrf1 interfaces=ether3 \
 route-distinguisher=10.1.1.1:111 import-route-targets=10.1.1.1:111 export-route-targets=10.1.1.1:111
 
# loopback interface
/interface bridge add name=lobridge
/ip address add address=10.9.9.4/32 interface=lobridge
 
# add routes to loopback addresses
/ip route add dst-address=10.9.9.2/32 gateway=10.3.3.3
/ip route add dst-address=10.9.9.3/32 gateway=10.3.3.3


/mpls
set propagate-ttl=no
/mpls ldp set enabled=yes transport-address=10.9.9.4
/mpls ldp interface add interface=ether2

/routing bgp instance vrf add instance=default routing-mark=vrf1 redistribute-connected=yes \
  redistribute-ospf=yes
/routing bgp peer add remote-address=10.9.9.3 remote-as=65530 address-families=vpnv4 \
  update-source=lobridge
  
  
/system identity
set name=PE-D